AR Autoworks Premier
0952 443 0310 Get a Quote

Purok 6, Tambo, Hinaplanon · Iligan City

Protect your car
like a pro.

Salt air off the bay, gravel on the highway, and sun that does not let up. We fit paint protection film, ceramic coatings, and heat-rejecting tint specified for those conditions — not for a showroom.

Get a free quote See our work
  • PPF Chip & scratch defence
  • Ceramic Gloss & hydrophobics
  • Tint Heat & glare control
10yr Full body PPF warranty
lifetime films available

What we do

Three jobs.
Done to one standard.

We do not offer everything. We offer the three things that actually keep a car's finish alive in this climate, and we do each one to the same standard.

PPF

Full Body Paint Protection Film

A clear urethane layer that takes the hit so your paint does not. We fit it to the whole car rather than the front only — protection that stops at the A-pillar just moves the problem to the doors. Every edge is tucked so the film disappears into the panel gaps.

  • Full body — including headlights, taillights, door handles, step sills, and side mirrors
  • Edges tucked in for a seamless, invisible finish
  • Two layers of ceramic coating applied over the film
  • 10-year and lifetime warranty films available
Ask about PPF
Ceramic

Nano Ceramic & Graphene Coating

A semi-permanent glass layer that bonds to the clear coat. Water sheets off instead of sitting, so road grime and salt air have far less time to bite into the finish. Correction comes first — a coating locks in whatever is underneath it.

  • Multi-stage paint correction before anything is sealed in
  • Full paint decontamination
  • Coating on all painted panels, plus glass
  • Wheels and calipers coated as standard
  • 5-year coating warranty
Ask about Ceramic
Tint

Nano Ceramic Tint

Heat-rejecting film that makes an un-garaged car survivable at 2 PM. We fit to the glass edge with no light gaps, no purpling, and no bubbling in the rear defroster lines.

  • Full cabin heat-rejection film
  • Edge-to-edge fit, no light gaps
  • Real infrared heat rejection, not just a dark shade
  • 10-year and lifetime warranty brands available
Ask about Tint

Packages & pricing

Priced before
we start. Never after.

Every figure below is a starting point for a standard vehicle. Film brand, paint condition, and panel count move it up — and you get the final number in writing before any work begins, never after.

Nano Ceramic Tint

Heat and glare control for daily drivers.

₱ 6,000 from / full vehicle

  • Full cabin heat-rejection film
  • Edge-to-edge fit, no light gaps
  • Real infrared heat rejection
  • 10-year and lifetime warranty brands available
Get a quote

Nano Ceramic & Graphene Coating

Correction first, then a coating that holds the gloss.

₱ 13,000 from / full vehicle

  • Multi-stage paint correction
  • Full paint decontamination
  • Ceramic coating on all painted panels
  • Glass coating
  • Wheel and caliper coating
  • 5-year coating warranty
Get a quote
What we recommend

Premium Full Body PPF

Everything covered, because half a car is half protected.

₱ 85,000 from / full body

  • Full body coverage, not front only
  • Headlights, taillights, and side mirrors
  • Door handles and step sills
  • Edges tucked in for a seamless finish
  • Two layers of ceramic coating over the film
  • 10-year and lifetime warranty films available
Get a quote

We push full body PPF because protection that stops at the front just moves the damage to your doors. Send your vehicle details through the quote form and we will tell you honestly if a smaller package would do the job.

Our work

Out of our bay.
Not a stock library.

Every photo below is a real vehicle we handled in Tambo. Come and see the cars in person if you would rather judge the finish with your own eyes.

A black Nissan Patrol finished and parked in the AR Autoworks bay, ceiling lights reflected cleanly down the flank
Nissan Patrol Full body PPF with two layers of ceramic over the film — edges tucked, ready for collection.
Ceramic-coated black paintwork with the bay ceiling lights reflected in an unbroken line across the roof and shoulder
Coated and cured Nano ceramic coating — reflections hold their edge straight down the shoulder line.
A technician floating a sheet of clear paint protection film over the wet hood of a black car
Film going on Full front PPF — the film floated onto a slipped hood before squeegee.
A black BAIC B60E finished under the hexagon lights in the AR Autoworks Premier bay, an XPEL wheel cover still on the front tyre
BAIC B60E Full body PPF — finished and under the lights before handover.
A white Toyota Alphard finished with full body paint protection film, parked in the AR Autoworks Premier bay
Toyota Alphard Full body PPF — every panel filmed, edges tucked, ready for handover.
A black Tesla Model Y seen head-on under the hexagon lights, the light frames reflecting evenly across a full body paint protection film finish
Tesla Model Y Full body PPF on a battery-electric car — EVs get the same process and the same standard.
Close view of the front fender meeting the headlight on a white Toyota Land Cruiser 300, the paint protection film edge tucked into the panel gap and the ceiling lights reflecting unbroken across the panel
Toyota Land Cruiser 300 White paint hides nothing — every film edge is tucked into the panel gap. The LC300 is one of our fortes.

We post every completed vehicle on our Facebook page.

How it runs

Five stages.
None of them skipped.

Most coating failures are not product failures — they are preparation failures. This is the order we work in, and we do not compress it to fit more cars through the bay.

  1. Inspect

    We walk the car with you under proper lighting and log every existing chip, scratch, and swirl before anything is touched.

  2. Decontaminate

    Wash, iron fallout removal, and clay. Coatings and film only bond to genuinely clean paint — this stage is not optional.

  3. Correct

    Machine polishing to remove the defects that would otherwise be sealed in and magnified under a coating.

  4. Apply

    Film or coating goes on in a controlled, dust-managed bay. Panel gaps and edges get wrapped, not trimmed short.

  5. Cure & Hand Over

    Controlled cure, then a final inspection together plus written aftercare so the work actually lasts.

What customers say

In their words.

Recommendations left on our Facebook page, in the words the customers wrote them in. Trimmed for length only — nothing rewritten.

As a hesitant wife, I honestly didn’t want us to get PPF at first. I thought it was just an unnecessary expense and something we could skip. But when I spoke with Sir Troy during the consultation, he patiently explained the value of the work and how important PPF is in protecting and maintaining the car in the long run. That conversation really changed my perspective… The process does take time, but once we got the car back, it was clear that the quality of the work was worth the wait.

Cherry Mae Jamon Paint Protection Film · via Facebook

Bang for the buck! Very satisfied with their services, i got my car ceramic coated and wala ko ga expect sa output, grabe ka shiny and hydrophobic, after parking ang mga abog dali ra gyud matanggal sa surface sa imoa paint and also very professional ang ilaa workmanship… I got what i paid for 10/10.

Med Abdel Nano Ceramic Coating · via Facebook

What really sets AR apart is their honesty and generosity. Unlike some shops I’ve dealt with before that surprise customers with hidden charges, AR surprised me with hidden freebies instead! They even installed my camera at no extra cost and gave me several complimentary items without me even asking.

Bryann Quing Nano Ceramic Coating · via Facebook

Questions

Before you book.

The things people ask us most. If yours is not here, message us — a straight answer costs nothing.

How long will my car be with you?

Plan on five to seven days. Paint correction, film work, and cure time cannot be rushed without costing you the finish you are paying for, so we book the car in properly rather than turning it around overnight.

When can I wash it after a ceramic coating?

Wait three days before the first wash so the coating fully cures. After that, use a pH-neutral shampoo — ordinary dish soap and strong degreasers strip the coating early. Skip automatic brush washes permanently.

Will paint protection film damage my paint when removed?

Not on healthy factory paint. Quality film is engineered to release cleanly with controlled heat. Resprayed or previously damaged panels carry more risk, which is exactly why we inspect and document before we start.

Do you work on motorcycles and fleet vehicles?

Yes — bikes, pickups, vans, and small fleets. Send the details through the quote form and we will price it properly rather than guessing.

Do I need an appointment?

Strongly recommended. We deliberately limit how many vehicles are in the bay at once so each one gets the full process rather than a rushed one.

Get a quote

Tell us the car.
We will tell you the price.

No call centre and no pressure. Send the details and you get a real number from the person who would actually do the work.

  • Reply within one working day
  • Free walk-around inspection
  • Written quote before anything starts

Prefer to message?

Messenger Call

So we can send the quote by SMS or Viber.

Year, make, and model — e.g. 2021 Toyota Vios.

Dark paint shows swirls more, so it changes prep time.

What are you interested in?

Existing scratches, a deadline, or a budget you want us to work to.

This opens your email app with the details filled in — nothing is stored on this website.

Find us

Drop by the bay.

Bring the car in and we will walk it with you under proper lighting. No appointment needed just to talk it through.

Address
Purok 6, Tambo, Hinaplanon
In front of Tambo Central School
Iligan City, Lanao del Norte
Philippines 9200 Open in Google Maps
Contact
0952 443 0310
ar.autoworks.premier@gmail.com
Hours
Monday – Saturday 8:00 AM – 5:00 PM Sunday By appointment